You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
ORPA-pyOpenRPA/WPy32-3720/python-3.7.2/Lib/site-packages/idlexlib/extensions/SubCodeToolbar.py

371 lines
12 KiB

6 years ago
# IDLEX EXTENSION
## """
## Copyright(C) 2011 The Board of Trustees of the University of Illinois.
## All rights reserved.
##
## Developed by: Roger D. Serwy
## University of Illinois
##
## Permission is hereby granted, free of charge, to any person obtaining
## a copy of this software and associated documentation files (the
## "Software"), to deal with the Software without restriction, including
## without limitation the rights to use, copy, modify, merge, publish,
## distribute, sublicense, and/or sell copies of the Software, and to
## permit persons to whom the Software is furnished to do so, subject to
## the following conditions:
##
## + Redistributions of source code must retain the above copyright
## notice, this list of conditions and the following disclaimers.
## + Redistributions in binary form must reproduce the above copyright
## notice, this list of conditions and the following disclaimers in the
## documentation and/or other materials provided with the distribution.
## + Neither the names of Roger D. Serwy, the University of Illinois, nor
## the names of its contributors may be used to endorse or promote
## products derived from this Software without specific prior written
## permission.
##
## THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
## OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
## MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
## IN NO EVENT SHALL THE CONTRIBUTORS OR COPYRIGHT HOLDERS BE LIABLE FOR
## ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF
## CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH
## THE SOFTWARE OR THE USE OR OTHER DEALINGS WITH THE SOFTWARE.
##
##
##
##
## SubCode Toolbar - provides a toolbar for SubCode.py
##
## About:
##
## [>] - list of subcode labels
## [##] - insert a subcode marker
##
## [-] 1.0 [+] - add or subtract from number by cursor
## [/] 1.1 [*] - divide or multiply number by cursor
##
## [RS] - Run SubCode
## [RSP] - Run SubCode and Proceed
## [RA] - Run All subcodes
##
##
## """
config_extension_def = """
[SubCodeToolbar]
enable=1
enable_shell=0
enable_editor=1
visible=True
[SubCodeToolbar_cfgBindings]
subcode-toolbar=
subcode-toolbar-plus=<Control-Key-equal> <Control-Key-plus>
subcode-toolbar-minus=<Control-Key-minus> <Control-Shift-Key-minus>
"""
import re
from idlelib.configHandler import idleConf
from idlelib import macosxSupport
import sys
if sys.version < '3':
from Tkinter import *
else:
from tkinter import *
import idlelib.ToolTip as ToolTip
from . import SubCode
SUBCODE_STR = SubCode.SUBCODE_STR
class SubCodeToolbar(object):
menudefs = [
('options' if not SubCode.SUBCODE_MENU else 'subcode',
[
('!Show %s Toolbar' % SUBCODE_STR, '<<subcode-toolbar>>'),
]),
]
def __init__(self, editwin):
self.editwin = editwin
self.text = editwin.text
self.TB = None # pointer to toolbar tkinter object
self.visible = idleConf.GetOption("extensions", "SubCodeToolbar",
"visible", type="bool", default=True)
self.setvars()
self.text.bind('<<subcode-enable>>', self.subcode_enable_event, '+')
self.text.bind('<<subcode-disable>>', self.subcode_disable_event, '+')
#self.text.bind('<<subcode-toolbar-plus>>', self.subcode_plus_event, '+')
#self.text.bind('<<subcode-toolbar-minus>>', self.subcode_minus_event, '+')
sc = self.editwin.extensions.get('SubCode')
if sc and sc.enable:
self.subcode_enable_event()
def close(self):
idleConf.SetOption("extensions", "SubCodeToolbar",
"visible", '%s' % self.visible)
idleConf.SaveUserCfgFiles()
def subcode_enable_event(self, ev=None):
if self.visible:
self.toolbar_enable(True)
def subcode_disable_event(self, ev=None):
self.toolbar_enable(False)
def subcode_toolbar_event(self, ev=None):
self.visible = not self.visible
self.toolbar_enable(self.visible)
self.setvars()
def setvars(self):
try:
self.editwin.setvar("<<subcode-toolbar>>", self.visible)
except Exception as err:
pass
def toolbar_enable(self, b=True):
sc = self.editwin.extensions.get('SubCode', None)
if b:
if sc and sc.enable:
self._make_toolbar()
else:
self._destroy_toolbar()
def _destroy_toolbar(self):
self.TITLES = None
if self.TB is not None:
self.TB.destroy()
self.TB = None
def _make_toolbar(self):
if self.TB is not None:
return # toolbar exists
top = self.editwin.top
f = Frame(top)
widgets = self.editwin.top.pack_slaves()
widgets = list(widgets) # list for Python 3 support
f.pack(side='top', fill=X, before=widgets[0]) # make toolbar play nicely with CodeContext
f.config(height=8)
mvar = [StringVar(top), StringVar(top)]
Separator = Label
try:
osx = (macosxSupport.runningAsOSXApp() or
sys.platform == 'darwin')
except:
osx = False
toolbar = [(Button(f, command=lambda: self.toolbar('titles'), text='>',
width=1 if not osx else 2),
None, 'Show %s Labels' % SUBCODE_STR),
(Button(f, command=lambda: self.toolbar('ins'), text='##',
width=2 if not osx else 3),
None, 'Insert %s Marker' % SUBCODE_STR),
(Separator(f), {'fill':Y, 'pady':0, 'padx':4}, None),
(Button(f, command=lambda: self.toolbar('minus'), text='-',
width=1 if not osx else 2),
None, 'Subtract from number by cursor then run %s' % SUBCODE_STR.lower()),
(Entry(f, width=6, justify='center', textvar=mvar[0]), {'fill':Y},
'+ - value'),
(Button(f, command=lambda: self.toolbar('plus'), text='+',
width=1 if not osx else 2),
None, 'Add to number by cursor then run %s' % SUBCODE_STR.lower()),
(Separator(f), {'fill':Y, 'pady':0, 'padx':4}, None),
(Button(f, command=lambda: self.toolbar('div'), text='/',
width=1 if not osx else 2),
None, 'Divide number by cursor then run %s' % SUBCODE_STR.lower()),
(Entry(f, width=6, justify='center',
textvar=mvar[1]), {'fill':Y},
'* / value'),
(Button(f, command=lambda: self.toolbar('mult'), text='*',
width=1 if not osx else 2),
None, 'Multiply number by cursor then run %s' % SUBCODE_STR.lower()),
(Separator(f), {'fill':Y, 'pady':0, 'padx':4}, None),
(Button(f, command=lambda: self.toolbar('run_subcode'), text='R%s' %
SUBCODE_STR[0].upper(),
width=2 if not osx else 4),
None, 'Run %s' % SUBCODE_STR),
(Button(f, command=lambda: self.toolbar('run_subcode_proceed'), text='R%sP' %
SUBCODE_STR[0].upper(),
width=3 if not osx else 4),
None, 'Run %s and Proceed' % SUBCODE_STR),
(Button(f, command=lambda: self.toolbar('run_all'), text='RA',
width=2 if not osx else 4),
None, 'Run All %ss' % SUBCODE_STR),
(Separator(f), {'fill':Y, 'pady':0, 'padx':4}, None),
]
mvar[0].set('1.0')
mvar[1].set('1.1')
self.mvar = mvar
for i, cfg, tooltip in toolbar:
if cfg is None:
cfg = {}
try:
i.configure(pady=0, padx=7)
i.configure(wraplength=0)
i.configure(borderwidth=1)
except: # catch ALL THE ERRORS
#print 'error',i, cfg, tooltip
pass
i.pack(side='left', **cfg)
if tooltip is not None:
ToolTip.ToolTip(i, ' %s ' % tooltip)
self.TB = f
self.TITLES = toolbar[0][0] # pointer to the titles button
def toolbar(self, cmd):
text = self.editwin.text
text.focus()
if cmd in ['plus', 'minus', 'mult', 'div']:
self.process_number(cmd)
if cmd == 'run_subcode':
text.event_generate("<<subcode-run>>")
if cmd == 'run_subcode_proceed':
text.event_generate("<<subcode-run-proceed>>")
if cmd == 'run_all':
text.event_generate("<<subcode-run-all>>")
if cmd == 'ins':
text.event_generate("<<subcode-insert-marker>>")
if cmd == 'titles':
self.titles()
def titles(self):
# make a popup menu of all subcodes in file
text = self.editwin.text
c = text.tag_ranges('SUBCODE')
L = []
if len(c) == 0 or c[0].string != '1.0':
L.append(('1.0', '## beginning of file'))
for tr in c[::2]: # only grab start of ranges
line, col = map(float, tr.string.split('.'))
L.append((tr.string, text.get(line, line+1)))
B = self.TITLES
rmenu = Menu(B, tearoff=0)
for line, label in L:
def jump(lineno=line):
self.text.mark_set('insert', lineno)
self.text.event_generate('<<set-line-and-column>>')
self.text.yview(lineno)
#m1 = label[0:min([50,len(label)])].strip()[2:]
m1 = label.strip()[2:]
lineno, col = map(int, line.split('.'))
m2 = '%s[%6s] %-50s' % (' '*col, line, m1)
rmenu.add_command(label=m2, command=jump)
x = B.winfo_rootx()
y = B.winfo_rooty() + B.winfo_height()
rmenu.tk_popup(x,y)
def shell_busy(self):
shell = self.editwin.flist.open_shell()
self.editwin.text.event_generate('<<subcode-focus-editor>>')
try:
if shell.interp.tkconsole.executing:
return True # shell is busy
except:
return True # shell is not in a valid state
return False
def process_number(self, cmd):
text = self.editwin.text
undo = self.editwin.undo
lineno, col = map(float, text.index(INSERT).split('.'))
txt = text.get(lineno, lineno + 1)
# get the number
pattern = r"([-]?[\d]+[\.]?[\d]*|\.[\d]+)"
p = re.compile(pattern)
h = p.finditer(txt)
j = [i for i in h if i.start()<=col and i.end()>=col]
if j:
if j[0].group() == '':
return
s,e,t = j[0].start(), j[0].end(), j[0].group()
else:
return
# at this point, a number has been found
if self.shell_busy():
return
a = float(self.mvar[0].get())
m = float(self.mvar[1].get())
if cmd == 'plus':
r = float(t) + a
elif cmd == 'minus':
r = float(t) - a
elif cmd == 'mult':
r = float(t) * m
elif cmd == 'div':
r = float(t) / m
if cmd in ['plus', 'minus']:
if '.' not in t: # keep integers as integers
r = int(round(r))
new_t = str(r)
undo.undo_block_start()
text.delete('%i.%i' % (lineno, s), '%i.%i' % (lineno, e))
text.insert('%i.%i' % (lineno, s), new_t)
text.mark_set(INSERT, '%i.%i' % (lineno, s + len(new_t)))
undo.undo_block_stop()
text.event_generate("<<subcode-run>>")
def subcode_toolbar_plus_event(self, ev=None):
self.toolbar('plus')
def subcode_toolbar_minus_event(self, ev=None):
self.toolbar('minus')